S. K. Enterprise

                       
 SKE-6E10HP)SPECIAL STRAIGHT EDGE POLISH MACHINE FOR 3 TO 6 MM 3INCHS-3 MITS SIZE GLASS .                     MFG.BY
          S.K.ENTERPRISE                           ' MAKE IN INDIA '
       A REGISTERED TRADE MARK

                 "SKE"

             SINCE 1993
S.K.ENTERPRISE . AHMEDABAD . GUJARAT.
      

SKE-5EP(14HP)STRIGHT LINE 3-12MM THK.GLASS IN 2X2 INCHE  TO 3X3 MITS SIZE EDGE POLISH VARTICAL SEMIAUTOMATIC MACHINE. 
AVAILABLE ALSO ECO MODAL -
SKE-4EP/5EP-STRAIGHTLINE GLASS EDGE POLISHING &'C' POLISHING/ROUND EDGE POLISHING WITH CHANGING  SPECIAL  DIAMOND AND POLISHING WHEELS.
NOTE-SOME OF AMOUNT WILL BE EXTRA TO PAY FOR SS TANK ATTECH WITH MOTORS
YOUTUBE TYPE -ONLY 'SKEASP '  TO WATCH ALL OUR SKE MACHINES WORKING DEMO VIDEOS.

DETAIL PROCESS:
WITH ONLY 4/5 MOTORS & SPECIAL SHAPE WHEELS GLASS THICKNESS WISE.MEANS IF YOU WANT TO MAKE PENCIL ROUNDING/'C' POLISHING ON 12 MM STRAIGHT 8'X4' GLASS,YOU HAVE TO FIX ALL WHEELS IN MACHINE ON 1 ST MOTORE ROUGH DIAMOND ,SECOND MOTORE FINE DIAMOND WHEEL AND 3RD AND 4TH MOTOR POLISHING WHEELS ,NOW YOU WILL ENTER 8'X4' GLASS ON SIDE BELT FROM ONE SIDE OF MACHINE VERTICALY IT WILL ENTER IN MACHINE AND SEMI AUTOMATICALY IT WILL PASS THREW WHOLE MACHINE IN PRESANS OF WATER AND POLISH YOU CAN GET POLISH ON ALL THE SIDES OF THIS GLASS ONE BY ONE .IF GLASS THICKNESS WILL CHANGE OR SHAPE YOU WANT TO CHANGE LIKE DHAR POLISH ON 8MM GLASS ,YOU HAVE TO CHANGE THE WHEELS AS PER YOUR REQUIREMENT.MACHINE WILLL BE SAME BUT ONLY WHEELS YOU HAVE TO CHANGE AND SET AS ON GLASS EDGE.SO YOU WILL GET 3' X 3' TO 3 MITS X 3 MITHRS GLASS IN 3 MM TO 30 MM THIKNESS EDGE POLISHING AND 'C' POLISHING ONEC IN A TIME SEMIAUTOMATICALY IN OUR SKE-4ER/5ER MACHINE WITH 10 TO 15 HP POWER AS PER ORDER.

MFG. BY S.K.ENTERPRISE, AHMEDABAD SINCE 1993
                     (MAKE IN INDIA)
SKE-5B(18HP) SEMI AUTOMATIC GLASS BEVELING MACHINE. STRAIGHT LINE GLASS (3-12MM & 6X6 INCHES TO 6-8 FEET IN SIZE) EDGE BEVELING (5MM TO 30MM) WITH CHANGING WHEELS TWICE, SEMI AUTOMATIC MACHINE WITH WATER AND POLISHING WATER, DIGITAL PANEL BOARD ETC.
WITH 3HP EACH MOTOR, SKE-5B IS WORKING EASILY.
SPINDLES / MOTORS DETAILS CHANGING WHEELS IN 2 PARTS.

PART-1: FOR BEVEL GRINDING WITH WATER ONLY
NO-1 & 2 METAL BOND DIAMOND CUP WHEELS ROUGH & FINE
NO-3, 3 & 5 - FINE RESIN CUP WHEELS FOR SMOOTH FINISHING.
(NOTE: FOR BEVEL POLISHING REPROCESS SAME GLASS TWICE)

PART-2: CHANGE WITH ALL 5 POLISH WHEELS. USE POLISH WATER
NO-1 & 2 RESIN FINE WHEELS
NO-3, 4, 5 BUFFING, FELT POLISHING /BUFFING WHEELS.

VIDEOS-WATCHING YOUTUBE VIDEOS TYPE-SKEASP OR SKEABD.

FOR MORE DETAILS CONTACT US SOON 24 X 7 SO WE CAN SEND MORE DETAILS ON WHATSAPP.

 

SKE-/5B (12/12 HP) STRAIGHT LINE GLASS EDGE BEVELING MACHINE

WITH CHANGING D. WHEELS TWICE, YOU CAN EDGE BEVELING ON 3MM TO 12MM THICKNESS GLASS, FROM 6X6 INCHES TO 6 TO 8 FEET GLASS SIZE WITH CONSTANT COOLANT FLOW IN THIS HEAVY-DUTY MACHINE.

MOTOR / SPINDLES:

FIRST (1) BEVELING:

• 1 & 2 DIAMOND CUP WHEELS
• 3, 4, 5 RESIN DIAMOND WHEELS

SECOND TIME (2) / TWICE BEVELING:

• 1 & 2 10S60 RESIN CUP WHEELS
• 3, 4, 5 POLISHING FELT / BUFFING WHEELS (USE POLISH POWDER 60%-80%)

(ONLY IN BEVELING, YOU SHOULD ENTER THE VERTICAL GLASS IN THE MACHINE TWICE: FIRST (1) FOR BEVEL GRINDING AND SECOND (2) TIME/TWICE FOR BEVEL POLISHING, WITH CHANGING POLISHING WHEELS AND APPLYING POLISHING POWDER IN WATER IN SEPARATE TANK.)

SPEED OF GLASS BEVELING:

• 1 METER PER 1.5 MINUTES FOR BEVEL GRINDING WITH DIAMOND WHEELS
• 2 TO 2.5 METER PER MINUTE FOR POLISHING WITH POLISHING WHEELS IN THIS SEMI-AUTOMATIC MACHINE.

NOTE:

• IF YOU DO NOT WANT TO POLISH IN THE MACHINE AFTER BEVELING WITH 5 DIAMOND WHEELS THE FIRST TIME ONLY, YOU CAN GET POLISHING WITH HAND BELT AND NAMDA / BUFFING MACHINE OUTSIDE THIS MACHINE. IT IS YOUR CHOICE, WE ARE NOT RECOMMENDING ANY PROCESS. AS PER SUITABLE FOR YOU, YOU CAN DO. ANY SMALL MISTAKE CAN SPOIL GLASS AND MACHINE; TAKE MORE CARE.